EZ Zone Welding Tape

Product Details:

» CBT is used to prevent molten metal leakage from the backside of a full penetration weld. A full penetration weld requires something to block the gap from molten metal overflow. CBT helps achieve that

» Ceramic Backing tape is a non-metallic ceramic material which is temporarily attached to the reverse side of a weld while helping to support a full penetration weld.

» It is made with several pieces of small ceramic tiles, glued to an adhesive tape.

» It is easy to apply, easy to clean up after the welding is completed, and can greatly improve welding quality and throughput.

» See next page for shapes and sizes available.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

U.S. and Foreign Patents Pending

EZ Zone welding tape is used to seal the root gap between pipes to trap Argon gas, but in a most innovative way! The welding tape is composed of two aluminum adhesive areas on the outside edges, with an adhesive-free center “Zone”. The unique design of the aluminum welding tape allows the edges to stick to the area surrounding the root gap on stainless steel and aluminum pipes with the adhesive-free “zone” being placed over the weld. The adhesive portion of the tape never comes in contact with the pipe as it is welded, creating a clean, contaminant-free weld. EZ Zone purge gas retaining tape is halogen and flurocarbon free.

Welding Tape Specifications

This welding tape is a 3 mil (75 micron) aluminum foil coated with a high shear, heat-resistant acrylic adhesive system. The soft foil conforms well to irregular surfaces.

EZ Zone Tape is available in two sizes 2.5" (64mm) and 4.0" (102mm) widths. The adhesive- free zones are 1" (2.5 cm) and 2" (5 cm) respectively.

Product Details:

EZ Tape is a traditional aluminum welding tape that can be used to seal root gaps while purging, and seal pipe ends for transporting. EZ Tape has many other conventional uses in the field such as sealing ducts for heating, air conditioning and refrigeration; and acting as an excellent vapor barrier. EZ Tape is high temperature resistant and conforms to irregular surfaces. EZ Tape is halogen-free.

EZ Tape is fully coated with an acrylic adhesive. EZ Tape is halogen free, contributing to a safer work environment for welders. This product is available in 2" (51mm) width only.

EZ Tape is a 3 mil (75 microns thick) aluminum foil coated with a high shear, heat-resistant acrylic adhesive system. The soft foil conforms well to irregular surfaces.

Product Details:

Weld Backing Tape greatly reduces and can even eliminate the need for back purging. The welding tape is composed of two adhesive areas on the outside edges and a center strip of fiberglass resistant up to 1,022°F (550°C) that is capable of withstanding applications between 300 and 600 Amps.

Because Fiback ™ weld backing tape is composed of a flexible fiberglass fabric; it can conform to a number of surfaces and shapes. Unlike other welding tapes such as ceramic tapes which develop stress points between pieces, Fiback™ tape is consistent in thickness creating a continuous bead during welding. Ideal for plate, sheet and pipe welding, Fiback™ can be used for pressure vessels, large bore pipes, shipbuilding, fabrication and many more applications.

Fiback ™ backing tape is suitable for SMAW (stick), TIG and MIG welding processes, and is compatible with carbon, alloy and stainless steels as well as aluminum. Fiback™ greatly reduces weld set up time and ensures that weld slag is safely collected in an enclosed weld pool, resulting in a high quality weld. Once welding is complete, the weld backing tape can be removed from the backside of the root gap, without the need for post-weld grinding or back gouging.

Additional Information:

• Delivery Time: 14 days

Product Details:

Weld Backing Tape greatly reduces and can even eliminate the need for back purging. The welding tape is composed of two adhesive areas on the outside edges and a center strip of fiberglass resistant up to 1,022°F (550°C) that is capable of withstanding applications between 300 and 600 Amps.

Because Fiback ™ weld backing tape is composed of a flexible fiberglass fabric; it can conform to a number of surfaces and shapes. Unlike other welding tapes such as ceramic tapes which develop stress points between pieces, Fiback™ tape is consistent in thickness creating a continuous bead during welding. Ideal for plate, sheet and pipe welding, Fiback™ can be used for pressure vessels, large bore pipes, shipbuilding, fabrication and many more applications.

Fiback ™ backing tape is suitable for SMAW (stick), TIG and MIG welding processes, and is compatible with carbon, alloy and stainless steels as well as aluminum. Fiback™ greatly reduces weld set up time and ensures that weld slag is safely collected in an enclosed weld pool, resulting in a high quality weld. Once welding is complete, the weld backing tape can be removed from the backside of the root gap, without the need for post-weld grinding or back gouging.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Fiberglass^TM Weld Backing Tape greatly reduces and can even eliminate the need for back purging. The welding tape is composed of two adhesive areas on the outside edges and a center strip of fiberglass resistant up to 1,022°F (550°C) that is capable of withstanding applications between 300 and 600 Amps.

Because Fiback ™ weld backing tape is composed of a flexible fiberglass fabric; it can conform to a number of surfaces and shapes. Unlike other welding tapes such as ceramic tapes which develop stress points between pieces, Fiback™ tape is consistent in thickness creating a continuous bead during welding. Ideal for plate, sheet and pipe welding, Fiback™ can be used for pressure vessels, large bore pipes, shipbuilding, fabrication and many more applications.

Fiback ™ backing tape is suitable for SMAW (stick), TIG and MIG welding processes, and is compatible with carbon, alloy and stainless steels as well as aluminum. Fiback™ greatly reduces weld set up time and ensures that weld slag is safely collected in an enclosed weld pool, resulting in a high quality weld. Once welding is complete, the weld backing tape can be removed from the backside of the root gap, without the need for post-weld grinding or back gouging.