CNC Plasma Pipe & Profile Cutting Machines

Product Details:

Our organization is counted amongst the most distinguished manufacturers, traders and suppliers of 2 Axis Pipe Cutters. The offered products are provided with two axis computer control & manually controlled bevel angels and thus ensure user-friendly operation. Before dispatch, the finished range is tested on various parameters by our quality experts to make sure the same is defect-free. We make sure to deliver the entire range to client’s doorsteps within the desired time-frame.

For more details on this download pdf file.

Product Details:

Clients can avail from us a range of 4 Axis Pipe Cutters, from Watts Specialties, Inc. These W-244 computer-controlled pipe cutters are provided with four-axis control for controlled bevels and deep weld penetration. To run in extremes of temperature, humidity and vibration, the W-244 is controlled by a heavy-duty industrial computer design. For easy access, controls are remotely mounted at the cutting head. The W-244 uses an innovative floating headstock & cutting head design along with the latest computer motion-control systems. The floating headstock & cutting head allows smooth accurate handling of irregular pipe (that could cause erratic cutting with a typical headstock). This programmable system is accurate, reliable and easy to maintain. With these machine any contoured pipe-end can be cut, intersections of four pipes or more & saddle holes, slots, rectangles or other custom cuts can be set. The entire job can be saved on the rugged flash memory card for recall later, once a pipe is set up with multiple operations and many patterns can be stored on the machine.

Cutting shapes:

• T’s
• Full Y’s
• K’s,
• Straight cuts
• Miters
• 90 degree saddles
• Mitered saddles (laterals)
• Off-set saddles
• Holes
• Saddle holes
• Mitered saddle holes
• Slots
• Rectangles
• Crosses

Specifications:

• Optional network connections are also available
• Multiple holes and cuts are made in perfect dimensional relationship to one another
• Helps to reload a partial job and retrace the steps back to the left off place
• The torch cutting speed remains constant even on steep angles
• Assures fast cutting speeds and a smooth cut
• Piercing is done off the cutting line for a clean edge
• Drive system is based on a gimbaled clamping system which floats vertically & horizontally
• Provides smooth positive rotation even with badly out-of-round or curved pipes.
• Prevents the pipe from walking lengthwise away from the drive clamp
• Floats mechanically on the pipe surface for accurate torch tip standoff control
• Easily triple or quadruple shop

Product Details:

We at Mehta Sanghvi & Co. have Industrial Grade CNC Controller with high speed DSP  with Our own Brand " VESTA"

Features:

• USB Port for Program transfer
• Large inbuilt memory for program storage
• Standard Shape Library
• Basic grid nesting on the CNC
• Easy access control panel switches
• Driven with Dual Drive (Y) Servo System with Precision Planetary gearbox with Anti Backlash mechanism
• High Quality rails ensure stable and high speed performance
• Precision Rack & Pinion Drives on X and Y Axis

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: nava sheva

Product Details:

We are involved in offering a broad array of OmniCut machines under an international renowned brand Lesser. It is gantry type, CNC profile cutting machine, which fulfills the small and medium scale industries in-house steel cutting. These machines have a highly advanced easy cut CNC controller with LCD touch screen which complements the cutting specifications. The Touch screen system is easy to operate with very elaborate graphic user interface. Easy cut CNC controller is industrial control computer and makes use of latest Digital Signal Processing (DSP). This assures stability of system even in adverse industrial environment. With the assistance of USB memory stick, the user can upload new designs and drawings.

Product Details:

Due to a high level of automation, easy set-up and user friendliness this machine produces quality components - quickly and efficiently. The symmetric wheel-housings and parking space for unused heads optimize the working width but keep space requirements reasonable. The combination of oxyfuel and plasma cutting processes cover all commonly occurring materials and tasks.

Key Features:

• Working Widths up to 6 m
• Rapid Speed up to 12M/Min reduces time between cuts
• Cutting Speeds up to 12 m/min
• Working lengths up to 38 m
• Cutting processes: Oxyfuel, Dry Plasma
  Marking Processes: Punch marker, powder marking and single nozzle Ink-jet
• Productive, compact
• User friendly CNC control for fast set up
• Synchronized bilateral longitudinal drives for good acceleration
• Automatic setting of all gas flows for oxy-fuel (Omniflow) and plasma
• Reliable automatic height sensing
• Symmetric wheel-housing for max. usable width
• Parking space for unused torches over the wheelhousing increases effective cutting width
• Length of wheel-housing gives maximum stability with minimum dead length
• Electrical cabinet positioned over the wheel-housing so it is not exposed to thermal radiation
• from the cut plate increases lifetime
• Electrical cabinet accessible from the side simplifies maintenance and service
• Professional cutting at an affordable price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva

Product Details:

Industrial grade cnc controller with high speed DSP. USB port for program transfer

Product Details:

Feature:

• Supply Flame and Plasma
• Easy To Use
• Portable and Light Weight
• Precision:±0.2mm
• Systems Language : English , Russia, Etc· Embedded Plasma THC

Specification:

• Material : Stainless Steel, aluminiam
• Type : Industrial
• Usage: Used in automobile, shipbuilding, engineering machinery, agricultural

Product Details:

We are a well-known distributor of CNC Cutting Machine - Atlis Schneiden in India.

Specifications 

• Mild Steel Cutting: Up to 200mm thickness

• Work Rest : Standard cutting table, Fume extraction , Water Bed,  Underwater plasma cutting table

• Positioning Speed: 6m to 12m/min.

• Brand: Atlis Schneiden. 

Product Details:

We at Mehta Sanghvi & Co. have Double sided Diriven CNC Oxyfuel And Plasma Profile Cutting Machine with Our own Barnd " VESTA"

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: NAVA SHEV

Product Details:

Promotech’s portable CNC shape cutting machine performs oxy-fuel or plasma cutting with single or double sided bevel on pipes, tanks, various steel structures. It can be used on flat or curved plates and can be fixed off-centre (hill side).

Model: MCM-1000

MCM main advantages:

• Full portability
• Cutting, beveling and welding processes are performed in automated cycles Off-centre (hill side) hole cutting/beveling and welding
• Quick and simple positioning inside or on top of the work piece with built in gyroscope (auto leveling)
• Multi-surface scanning for cutting and welding
• Fast hole positioning with laser marking
• Torch path teaching
• Simple and user friendly interface allows easy input and configuration of cutting/beveling and welding
• High quality, efficient and repeatable performance
• Real time torch correction
• WI-FI monitoring, recording and uploading
• MCM remote control on a mobile device