MIG Welding Machine

Product Details:

Mehta Sanghvi & Co. is authorised dealer and service provider of DAIHEN Corporation in India which is manufacturing MIG Welding Machine (D- MIG400) instituting a dedicated mass production system. Subsequently, the company has been enhancing a series of products in order to fulfill the demand of society.

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava sheva

Product Details:

Sigma Select you will have one welding machine, that you can instantly adapt to match your current production needs – without deselecting functions you may need in the future. Sigma Select is the new generation of welding solutions, which make it possible for you to adjust your setup whenever you need to.

MAKE A SMART INVESTMENT
With Sigma Select you don’t have to worry about the future. Once you buy the machine, you won’t have to invest in another machine for a long time. You can simply upgrade your Sigma Select with the new functions you need for less than the cost of a new welding machine. Upgrade your welding set-up by adding programs or functions if new customers make new demands on your welding production.

BASIC CONTROL PANEL
For basic welding. No unnecessary gadgets. Use the control knobs to adjust your welding parameters.

GRAPHIC CONTROL PANEL
Built to meet the future. Choose Synergic or Pulse and upgrade if your needs change. The digital soft key control panel is prepared for multiple add-ons including automatic functions for easier welding. Pick it up and take it with you.

Product Details:

The Automig range is characterized by ease-of-operation and unique welding performance. The welding machines are designed with a robust cabinet with aluminium-zinc-coated plates for heavy duty applications and long service life as well as large swivel front wheels and wide track width in the rear. There is easy access to change of wires and wire drive rolls for optimal configuration. All Automig versions are equipped with the ergonomic MIG-A Twist® torch for easy access to hard-to-reach locations.

BUILT-IN ADVANTAGES
• Three-phase models with 180-250 amp output
• Two control panels - with/without spot/ interval welding and control at the torch   handle

OPTIONAL EQUIPMENT
• MIG-A Twist® torch with Dialog control
• Automig 273 is available with fourroll wire feed system
• Unique wire drive rolls with V-groove or U-groove, 0.6-1.0 mm
• Anti-slip rubber mat on top

Product Details:

Sigma Select you will have one welding machine, that you can instantly adapt to match your current production needs – without deselecting functions you may need in the future. Sigma Select is the new generation of welding solutions, which make it possible for you to adjust your setup whenever you need to. 

MAKE A SMART INVESTMENT 
With Sigma Select you don’t have to worry about the future. Once you buy the machine, you won’t have to invest in another machine for a long time. You can simply upgrade your Sigma Select with the new functions you need for less than the cost of a new welding machine. Upgrade your welding set-up by adding programs or functions if new customers make new demands on your welding production.

BASIC CONTROL PANEL 
For basic welding. No unnecessary gadgets. Use the control knobs to adjust your welding parameters. 

GRAPHIC CONTROL PANEL 
Built to meet the future. Choose Synergic or Pulse and upgrade if your needs change. The digital soft key control panel is prepared for multiple add-ons including automatic functions for easier welding. Pick it up and take it with you.

Product Details:

Sigma Select you will have one welding machine, that you can instantly adapt to match your current production needs – without deselecting functions you may need in the future. Sigma Select is the new generation of welding solutions, which make it possible for you to adjust your setup whenever you need to. 

MAKE A SMART INVESTMENT 
With Sigma Select you don’t have to worry about the future. Once you buy the machine, you won’t have to invest in another machine for a long time. You can simply upgrade your Sigma Select with the new functions you need for less than the cost of a new welding machine. Upgrade your welding set-up by adding programs or functions if new customers make new demands on your welding production.

BASIC CONTROL PANEL 
For basic welding. No unnecessary gadgets. Use the control knobs to adjust your welding parameters. 

GRAPHIC CONTROL PANEL 
Built to meet the future. Choose Synergic or Pulse and upgrade if your needs change. The digital soft key control panel is prepared for multiple add-ons including automatic functions for easier welding. Pick it up and take it with you.

Product Details:

Sigma One is a super simple, high-performance welding inverter. It is ideal for busy welding productions where the main aim is to keep productivity level high.

• High duty cycle - weld for many hours
• Few programs and function – only the essentials
• Fast weldign with pulse function
• Advanced equipment, simple to operate

Use Sigma One for welding large steel structures, stainless steel alloy,mild steel, carbon steel prefabrication and thick plates in mild and stainless steel in the production hall or on-site.