Orbital tube to tube welding machine

Product Details:

The orbital weld heads HX for compact cooling systems are setting new standards! "HX" stands for "heat exchanger" and for the welding of pre-mounted elbows in tight pipe bundles of heat exchangers into a pipe coil. There is no other solution as effective as this one in the world!

Product Details:

We hold expertise in providing a wide range of Orbital Welding Power Supply Orbimat 300 AC/DC to the patrons. These products have adjustable AC balance and frequency to AC arc. This can be controlled to attain the optimum weld profile for the application. The functions are controlled on easy understanding weld level screens. These weld heads are used as a material which require an alternating current to be welded. We hold expertise in providing a wide range of Orbital Welding Power Supply Orbimat 300 AC/DC to the patrons.

AC Arc Characteristics

• When welding some materials it is advantageous to use an AC arc to aid the welding process
• Most common material for use with an AC arc is aluminum and it’s alloys
• Aluminum alloys form and oxide layer which has a very high melting temperature (above that of the aluminum). This means that when using a DC arc the oxide layer must be removed mechanically prior to welding
• The cleaning process has to be very effective and very thorough and any trace of the oxide will cause weld defects
• When an AC arc this oxide is broken down by the alternation of the polarity
• Therefore the material will not need the substantial cleaning required with DC
• The profile of the arc can be altered by the AC frequency, this allows the operator to select a wide or narrow arc depending on the application
• The profile of the weld bead can also be controlled using the AC balance facility
• This function adjusts the shape of the wave form between negative and positive, and therefore results in more or less penetration
• By using a suitable combination of AC Balance and AC Frequency an optimum weld profile can be developed
• This can be further enhanced by the range of different gas mixes available to suit particular applications and you should contact your gas supplier to discuss this with them

Technical specifications:

• Storage capacity: 300 procedures
• Extended storage: Unlimited with smart media
• Welding process: TIG with or without filler
• Welding current: Maximum 300Amps
• Input power supply: 415v 3 Phase
• AC frequency range: 50 to 200 Hz
• AC balance range: 20 to 80%

Duty cycle:

• 100% @ 190 Amps
• 60% @ 250 Amps
• 40% @ 300 Amps
• Dimensions (WDH)– 500 mm x 420 mm x 460 mm
• Weight – 47 kg (including cooling unit)
• Optional Extras
• Orbicool 3003 - High Efficiency Liquid Cooling Unit
• Remote Control Unit - Basic Operation of System with 7.5m cable
• Data Logging Package – Complete Off-Line
• programming and Data Logging Package
• Orbitwin 300 AC – Twin Head Auto Switching Unit for increased production rates
• material for use with an AC arc is aluminum and it’s alloys

Product Details:

The best solution for a precise and fast preparation of tungsten electrodes. The perfect hand-held grinder for cutting, grinding and planing electrodes which are used in WIG/TIG welding machines.One machine – complete electrode preparation:
• Grinding electrodes:
– 4 different angles
– 6 different electrode sizes
• Facing electrodes
• Cutting electrodes The machines are available with a high-quality and powerful drive with 230 Volt and/or 110 Volt. Machines and accessories are delivered in a durable storage and shipping case.

Additional Information:

• Delivery Time: ready stock

Product Details:

The TPWH-OA Series Open Weld Head is designed for TIG welding on tube to tube, pipe to pipe and pipe fittings and is suitable for carbon and stainless steel." The TPWH-OA Series is used for applications that require AVC/OSC." Welds tubing and pipe for industries such as chemical, food, medicine, boilers, military and nuclear industries.

 

• Commonly used for medium to thick wall stainless and carbon steel material and other pipe alloys
• Used for pipe to pipe, tube to tube, butt welds, flange welds, elbows, valves etc.
• Arc voltage control (AVC) and oscillation control (OSC) for multi-pass welding procedures
• Automatic all position TIG welding for tube and pipe welding with or without wire feed
• Compact design for limited radial and axial clearances / can perform up to 1” wall thickness
• Water cooled and highly durable torch design
• Recommended Power Unit = OW-ARC 250 and 400

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva

Our P series is characterized by special design features intended to ensure easy handle ingcombined with a high level of economy and functional i ty.With extreme precision, these tube-to-tube-sheet orbital weld heads will produce several thousand weld seams at constant quality

The orbital weld heads HX for compact cooling systems are setting new standards! "HX" stands for "heat exchanger" and for the welding of pre-mounted elbows in tight pipe bundles of heat exchangers into a pipe coil. There is no other solution as effective as this one in the world!

Application:Air cooled heat exchanger Air cooled steam exchanger Air cooled condensors Shell tube condensors Finned tube exchanger Box headerHVAC Seal Weld Strength Weld Gas cabinats Component Manufacturieng

The RPG series represent ease of use and particularly economical clamping. The capabilities of our RPG range include squaring (I-seam) thin-walled stainless steel tubes and micro-fittings, as well as unalloyed and low-alloyed steels, aluminum and titanium. The machines fit excellently in the hand as their size and weight can hardly be surpassed. Users can select the appropriate clamping shells from the range of accessories for each diameter.

Application:high purity pipingDairy pipingPharma PipingInstrumentation PipingAero space pipingOil and Gas pipingNuclear piping

Our prestigious clients can avail Tube to Tube Sheet Weld Heads that are suitable for TIG welding of small tubes to tubes sheet for carbon and stainless steel applications. It facilitates ease of operations with controls provided on handles. It is made from the topmost grades of basic components and offers high accuracy with unmatched speed of performance. It can be availed at reasonable rates.

Features:

• Easy to operate
• Impeccable finish

Additional Information:

• Minimum Order Quantity: 1 Unit

Leveraging on our vast experience of trading, supplying, and exporting a large array of Open Orbital Weld Heads we are presenting Open Weld Head with AVC/OSC to our esteemed customers. These are having exclusive design and functionality. It features fully integrated drive motor in the housing and offers seamless performance under challenging conditions. Our patrons can avail these at very reasonable prices.

Features:

• Compact design
• Operator friendly

Additional Information:

• Minimum Order Quantity: 1 Onwards

We are engaged in offering a wide range of Orbital Welding Power Supply ORBIMAT 300 CB to the clients. This is a latest technological innovations which comprises a brand new interface, a crystal clear 10.5” color monitor and a fully computer controlled power source. Our range is known for its attributes like compact design, longer service life, easy installation, perfect finish, low power consumption, minimum maintenance and hassle-free performance.

Additional Information:

• Minimum Order Quantity: 1 Onwards

The TPWH-O Series is designed for TIG welding on tube to tube, pipe to pipe and pipe fittings and is suitable for carbon and stainless steel." The TPWH-O Series is used for applications that do not require AVC/OSC." Welds tubing and pipe for industries such as chemical, food, medicine, boilers, military and nuclear industries.

 

• Suitable for thin wall stainless steel, carbon steel and other common alloys
• Capable of welding 4mm (.158”) wall thickness
• Used for tube to tube, tube to flange, tube to elbow and tube to valve etc.
• Automatic all position TIG welding for tube to tube welding with or without wire feed
• Water cooled and highly durable torch design
• Mechanical tracking ensures consistent torch height control
• Recommended Power Unit = OW-ARC 200

Additional Information:

• Minimum Order Quantity: 1 Unit

The orbital weld heads HX for compact cooling systems are setting new standards! "HX" stands for "heat exchanger" and for the welding of pre-mounted elbows in tight pipe bundles of heat exchangers into a pipe coil. There is no other solution as effective as this one in the world!