Gas Cutting and Welding Systems

Product Details:

Orbital Pipe & Tube Saw

Innovative tube saws from Orbitalum Tools for cutting and beveling of tubes and elbows (also for thin-walled stainless steel) in just seconds. The perfect preparation for orbital welding.

Easy to use, powerful and compact saw with low weight – our GFX 3.0 provides even more outstanding features and is the ideal solution for cutting of thin-walled tubes. The rugged design ensures a long product life, making the saws highly economical.

The ergonomic GFX 3.0 is extremely low-maintenance, and ideal for a wide range of applications. Materials the GFX can cut include unalloyed, low and high-alloy steels, stainless steels, non-ferrous metals, aluminum and titanium alloys, composites and plastics.

State-of-the-art ORBITALUM pipe saws include a laser alignment cut-off guide. When cutting elbows, a second clamping point enables tube elbow severing. The powerful motor is equipped with overload protection and ergonomic handles and is available for the voltages 230 V, 50/60 Hz or 120 V, 50/60 Hz.

The GFX 3.0 is designed for applications in the food processing, beverage, pharmaceutical, and chemical industries.

• Square, burr-free and cold machining process
• Deformation-free clamping system engineered for thin-walled tubes
• Easy handling through light weight
• Simultaneous or separate cutting and beveling
• Increased productivity
• Low-maintenance and service friendly
• Ideal for pressfitting applications
• Second saw blade position to cut off elbows
• Ideal for pressfitting applications
• Optimized chip flow due to a new vice design
• Cast iron clamping jaws
• Integrated laser alignment guide to determine the cut off point
• Ergonomically designed motor handle
• Powerful drive with 1.2 kW and adjustable speed control for cutting several materials and extended tool life
• Electronic overload protection with integrated temperature monitor and electronic speed regulation
• Ergonomically positioned speed control adjusting wheel
• Swivel cable with a quick-disconnect coupler: For easy and quick replacement of power cables
• Direct mounting on workbench possible with GFX 3.0

Additional Information:

• Delivery Time: 3 to 4 weeks

Product Details:

The matrix below works as a basic guideline for raw selection of suitable product combinations for flamecutting of carbon steel. The material thickness is basic factor determining the combination of cutting
equipment. If more than one variant is offered than options are listed according to their power / perfor-mance, most powerful always at the end. In case of special applications.

Product Details:

Owing to the presence of our expert team members, we are engaged in catering a wide range of PUG Cutting Machines under our product range. Our offered range of PUG Cutting Machines is available at market leading prices along with unmatched quality. Our entire product range is processed under the strict supervision of experts, using the high grade technical skills and advanced machinery and other related equipments. Our ranges of products are highly appreciated among our clients due to their trouble free installation and superior quality.

Features

• Market leading prices
• Low maintenance
• Excellent life

Product Details:

Migatronic Delta is a range of three mono-phase, portable inverters: two MMA machines and one TIG machine with pulse. The machines are in the new rounded and compact Migatronic design with simple control panels and suitable for professional workshop use, on-site tack-welding operations, fast call-out response with the service van as well as assembly and repairs.

Delta 140 E, 160 E and 180 E

• Delta 140 E, 160 E and 180 E are operationally reliable MMA machines making quality welds in all materials with up to 3.25 mm electrodes. The
• welder has the option of a plus or minus polarity on the electrode clamp. Features also include hotstart, arc control and protection against voltage fluctua-tions, and with the scratch ignition, the MMA
• versions can also be used for simple TIG welding.

Delta 160 and 200 HP

• Delta 160 HP and 200 HP are Migatronic's smallest DC TIG welding machines with pulse function. For thin and medium wall thicknesses in stainless
• steel, mild steel and other materials. High output in the current range 5-160/200 A.
• TIG or MMA, 2-stroke or 4-stroke, and HF or LIFTIG® ignition are optional functions on the
• function switch,and the welding current is easily read on the digital control panel.

Product Details:

Heavy Duty Welding Systems offered can be made available by us in different finish specifications to choose from. Providing for flawless work performance, these welding machines come with low power consumption as well as feature water cooling performance support. These machines also allow for automatic controlling of welding time. Some of its features include:

 

• Suitable for low carbon steel, wire, stainless steel plated options
• Allows for adjustable welding time and with good repetition
• Low power consumption of main transformer
• Easy operation and maintenance

Product Details:

Oxy fuel gas pipe cutting machine with chain and gas cutting torch and accessories.

Additional Information:

• Production Capacity: 50
• Delivery Time: 4 to 7 days

Product Details:

Typical set-up of light system for OXY-FUEL cutting of carbon steel. Orbit torch is suitable for precise and comfortable cutting of material up to thickness of 30 mm. Lightweight shank and cutting attachment offers easy handling, hose checkvalves and three-function FR-34R flashback arrestors guarantee safe operation and couple of FixiCONTROL regulators provide sufficient supply of technical gases.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: NAVA SHEVA

Product Details:

LCSF 2in to 6in OD (DN50-150) Low Clearance Split Frame Ring Set, complete with 206 rotating ring set, 4 jaw chuck system and 4 extension leg sets, operating hand tools, manual and storage case. Excludes tool slides, starwheel feed and drive

Features:

OD mounted low clearance rotating ring machine tool designed to cut, bevel, single point and counterbore pipe. The LCSF series splits in half for external mounting to inline pipe or slips over an open end, and is the foundation for the industry's most complete weld prep machining system

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva

Product Details:

We are manufacturer of Gas Cylinder Trolley from Mumbai, India. We are having various ranges and capacities of the products available with us.

Product Details:

We are manufacturer, supplier and exporter of Chain Type Oxyfuel Pipe Cutting And Beveling Machine from Mumbai, India.

Product Details:

GCE cutters are engineered from solid brass stampings with silver soldered joints and provide a lightweight, well balanced, durable cutter giving reliability. Cutter employs the nozzle mix principle, in which the combustible gas mixing is confined to the cutting nozzle. This results in a cutter which  are highly resistant to backfire and flashback. A wide range of accessories are available for this cutter, such as attachments for heating, gouging, sheet metal nozzles, circle attachments, etc., to give maximum possible versatility. GCE torches and nozzles conform to EN ISO 5172.

Features:

• Rear mounted valves
• Cutting lever
• Round handle

Product Details:

Medium cutting system based on MK3 torch provides power enough for cutting of 150 mm steel plates. Aluminum forged shank, cutting attachment with massive brass body and head and stainless steel tubes make entire system robust and durable keeping its weight still reasonably low. Shank and cutting attachment are part of complex MK3 system offering wide range of compatible products and accessories. High-end Unicontrol regulators and sophisticated four-function FR50 flashback arrestors provides stabile gas supply and allow later expansion of system and potential usage of even more powerful torches and nozzles.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva

Product Details:

NM250 cutting torch is core of heavy-duty cutting system. Torch provides sufficient capacity to cut steel up to 300 mm thick. All-metal design, high grade materials, stable surface treatment or color-coded trim valves prolongs life time, improve ergonomics and simplify handling. Couple of Unicontrol regulators and high flow FR50 flashback arrestors provide sufficient amount of gas even for most demanding cutting applications but keep safety of operation on utmost level.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva

Product Details:

PORTABLE STRAIGHT LINE CUTTING MACHINE GCE proFit®GCE proFIT® is the universal cutting machine with classical design mainly for oxy-fuel cutting applications up to 150 mm metal sheet thickness (up to 100 mm with two cutting torches). It is rugged but precise portable machine which proposes many user benefits. It can be used for straight cuts guided by the rail, manual-guided shape cuts and circular cuts. The cutting torch can be fixed in vertical position or angled for bevel cutting of metal sheet edges.

• Lightweight portable machine for one-hand manipulation
• Easy installation and operation
• Two kinds of interlocking, 2 m long guide rails
• All common fuel gases service
• Various range of cutting torches for diff erent types of cutting nozzles
• Basic one-torch confi guration can be extended for two-torch operation
• Strip cutting and bevel cutting with two torches
• Precise drive system is ensuring constant cutting speed
• Exact adjustment of the torch position

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: EUROPE BANGALORE

Product Details:

We are manufacturer, Supplier and Exporter of Electromagnetic Oxyfuel Pipe Cutting Machine from Mumbai, India.