Mehta Sanghvi & Company

All-round Plasma Cutting Unit for CNC guided cutting of electrically conductive materials with Plasma Machine Torches and Air, Oxygen, Nitrogen or Argon/Hydrogen as plasma gases.

• From 0.5 up to 70 / 80 mm material thickness with HiFocus- respectively HiFocusPLUS-technology
• Recommended cutting range from 0.5 up to 50 / 60 mm (technology depending)
• Max. thickness for piercing 40 / 50mm (material depending)
• marking and punching, also of coated materials using Plasma Gas Controller‚ Flow Control
• Serious cost advantage, investment and operating costs
• amount to less than a fourth of laser costs
• Low squareness and inclination tolerances of the cutting
• surface; nearly no rework required
• Precise profiles when cutting sharp edges or narrow radii
• Cutting of small holes
• HiFocus technology grants high part accuracy
• No or easy to remove slag adherence (depends on material)
• Fast cutting start because of very short transition time

With the maximum power and performance for air plasma in our line, the Powermax 105 delivers superior cut quality and piercing up to 22 mm (7/8"). It has the duty cycle and reliability for the most demanding cutting and gouging jobs. Seven Duramax torch styles provide greater versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging. Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or the workpiece.

Applications

• Hand cutting
• Gouging

Automated cutting

• - X-Y Table
• - Track systems
• - Pipe systems
• - Robotic systems

Pierce capacity*

• 7/8" (22 mm)
• 3/4" (20 mm)

* Pierce capacity varies depending on the equipment being used. The higher capacity requires automatic height control to set independent pierce and cutting heights for the torch. When torch height is set manually, the lower capacity applies.

Metal removal rate

• Gouge capacity
• 21.8 lbs. (9.8 kg) per hour
• Groove profile

The HPR130XD delivers incomparable HyDefinition cut quality at half the operating costs, and is now available with patented True Hole technology

Key advantages:

• New HDi thin stainless steel technology
• Superior cut quality and consistency
• Maximized productivity
• Minimized operating cost
• Unmatched reliability

Operating data:

• Mild steel cut capacity
  Dross free cutting 16 mm (5/8")
  Production pierce 32 mm (1-1/4")
  Maximum cutting capacity 38 mm (1-1/2")
• Stainless steel cut capacity
  Production pierce 20 mm (3/4")
  Maximum cutting capacity 25 mm (1")
• Aluminum cut capacity
  Production pierce 38 mm (1-1/2")
  Maximum cutting capacity 25 mm (1")
  
  
  Within the intricate world of fabrication, precision is the cornerstone of excellence, and CNC plasma cutting machines embody this ethos flawlessly. Our extensive assortment caters to all requirements, offering industrial-grade plasma cutting machines alongside affordable CNC plasma cutters. Whether you seek CNC plasma cutting services or aspire to acquire your own CNC plasma cutter, our pricing remains competitive, ensuring accessibility without compromise on quality. Explore our diverse range, featuring CNC profile cutting machines and high-precision plasma cutting machines, to discover the ideal match for your fabrication endeavors. Embrace the transformative potential of our innovative CNC plasma cutting technology and elevate your craftsmanship to unparalleled heights.

The HPR400XD delivers the ultimate in mild steel plasma cutting performance with the versatility to deliver industry leading stainless steel cut quality

Key advantages

• New HDi thin stainless steel technology
• Superior cut quality and consistency
• Maximized productivity
• Minimized operating cost
• Unmatched reliability

• Mild steel cut capacity
  Dross free 38 mm (1-1/2")
  Production pierce 50 mm (2")
  Maximum cutting capacity 80 mm (3.2")
• Stainless steel cut capacity
  Production pierce 45 mm (1-3/4")
  Maximum pierce 75 mm (3")
  Severance 80 mm (3.2")
• Aluminum cut capacity
  Production pierce 45 mm (1-3/4")
  Maximum cutting capacity 80 mm (3.2")

Key advantages

• New HDi thin stainless steel technology
• Superior cut quality and consistency
• Maximized productivity
• Minimized operating cost
• Unmatched reliability

Operating data

• Mild steel cut capacity
• Dross free 32 mm (1-1/4")
• Production pierce 38 mm (1-1/2")
• Maximum cutting capacity 64 mm (2-1/2")
• Stainless steel cut capacity
• Production pierce 32 mm (1-1/4")
• Maximum cutting capacity 50 mm (2")
• Aluminum cut capacity
• Production pierce 25 mm (1")
• Maximum cutting capacity 50 mm (2")

• Fine Focus 450
• Fine Focus 800
• Fine Focus 1600
• Hu Focus 80i
• Hu Focus 161i
• Hu Focus 130
• Hu Focus 280i
• Hu Focus 360i
• Hu Focus 440

• Experience up to a 55% increase in consumable life andmore reliable arc-starting.
• Upgrade to Duramax torch technology.
• Standard hand torch, straight hand torch and machine torch now available!

Easy plug-and-play upgrade for:

• Powermax1000
• Powermax1250
• Powermax1650

Our organization holds specialization in offering a broad array of Laser Cutting Machine Laser Mat to the patrons. These products provide a large working surface and flexible tool selection options, resulting in outstanding cutting quality. This is considered as one of the fastest mediums. These products assist in producing highly accurate parts due to their linear guide ways for longitudinal and transverse drives. The laser beam source moves with the standard speed uploading while traveling with the machine in the longitudinal direction. Due to the moving mirror in the transverse direction, the beam gets reflected into the focal optics of the cutting head. Thus, the beam travels in a steady path that aids in large cutting tables. The processes can be controlled via the operating panel by a color video camera, which is fixed at the cutting head.

Attributes:

• Optimized sequencing of the cutting process
• Highest positioning accuracy over the entire working area
• High positioning speed of up to 0.5 G
• Central operating station
• Patented magnetic holder for protection of the cutting head
• 4 to 8 CNC-axes with resolution of 0.001 mm
• Beam length compensation
• Corresponds to laser safety class 1

Other details of these products are as follows:

• The bevel head for vertical and bevel cuts from 0 degrees to 45 degree
• I-, V- and Y-cuts Ex. for weld edge preparation
• Independent adjustment of rotation and bevel angle axes
• Infinitely rotatable head and no cable wind-up
• Optimal results provided through the combination of 5 axis interpolation and the auto process laser software package
• Continuous adjustment of the bevel angle during the cut like for pipe connection cuts on flat sheets
• Compact cutting head with 7.5" and (optional) 10" focal length lenses cover the complete bevel cutting range
• Bevel head is protected by patented magnetic holder
• Reliable height control by the PAN capacitive height sensing system allows precise bevel cutting, even at a 45 degree angle